How to Setup MSRM Wifi Extender?

MSRM WiFi extender setup, if done properly, can ensure a wonderful wireless networking experience for you. Nowadays, most people have big houses and they often experience network drop-offs the moment they go a little far away from the router. So when you add your MSRM setup in your network, your network coverage extends by manifolds.

Adding a wireless range extender enables you to stay connected to the network even if you change floors within your house. You just have to go about the MSRM WiFi extender set up and place your device wherever you experience dead zones. The moment you turn On your device after setting it up, it will eliminate all the dead zones from your home.

So this post has been designed for all MSRM users who want assistance regarding the MSRM extender setup and installation. This post will take you through the steps to set up your new wireless range extender along with some troubleshooting steps in case you encounter any issues during the configuration.

Different Methods for MSRM Extender Setup

Mainly, there are two methods that help you go about the MSRM WiFi extender setup. We have put down the instructions for both methods to help you better understand the MSRM setup and configuration.

Method 1: Web Portal

Firstly, plug the MSRM extender into a power outlet and turn it On.
Make sure that you place the extender nearby the router during the initial setup.
Secondly, turn On your PC and connect to the extender’s network.
Open a web browser and type the default IP address of your MSRM extender.
Type 192.168.0.1 in the web address bar and click Go.
After that, login to the extender using the extender login details.
Thereafter, the MSRM extender setup wizard will show up on the screen.
Follow the on-screen prompts to finalize the settings and then click Apply.

Finally, the MSRM WiFi extender set up will be completed. You can place your device anywhere in your home.

Method 2: WPS

The extender and the router must be placed nearby and turned On.
After that, find the WPS button on the extender.
To perform the MSRM WiFi extender setup via WPS, you need to press the button.
Press the WPS button and wait for a few seconds.
After a few seconds, press the WPS button on your router.
Now, let your devices set up with each other.
Finally, the MSRM setup using the WPS button will be completed.

At last, you can find a suitable place to install your new extender.

Why Can't I Set Up My MSRM Wifi Extender?

If you find any issues coming up while going through the MSRM extender setup, surely your device is encountering some glitch. Please find below some of the most common causes of MSRM setup issues:

Extender and router placed far away from each other
Power issues on the device
Incorrect router’s WiFi password
Incompatible router
MAC filtration enabled on the main network
Firmware issues

How to Fix MSRM Extender Setup Not Working?

1. Check Power and Wifi Connection

Kindly change the power outlet in which the extender is plugged in. Power issues should be avoided at all cost or else your device will be damaged.

2. Power Cycle the Wifi Extender

If the MSRM WiFi extender set up issues occur, force shut down the process and turn Off your device. Wait for a few seconds before you turn On the device once again.

3. Check for Firmware Updates

Sometimes, you have completed the entire setup process and then you come across the issues. Well, your device encounters problems due to outdated firmware. Make sure you upgrade your extender as soon as you complete the MSRM extender setup.

4. Provide Stable Wifi Signal

Make sure the WiFi router’s network is stable. Bring your extender a little closer to the router in order to ensure a stable yet undisturbed connection. Try rebooting the router for getting better performance.

5. Reset the Wifi Extender

If you still come across the setup issues, try resetting the extender. Press and hold the MSRM extender reset button for 10 seconds. After that, you can re-attempt to set up your device.

FAQs

Can I Set up an MSRM Extender With My Computer?

Yes, you can use your computer to set up your wireless range extender. Just connect your PC to the WiFi network of your MSRM extender. Login to the device using the default IP 192.168.0.1 and follow the on-screen prompts.

Do I Need to Create an Account for MSRM Extender Setup?

No, you don’t need to create an account. However, you just have to login to the device using the default login credentials.

How to Connect to MSRM Wifi Extender?

Simply go to Settings on your mobile and choose your extender’s network when you want to connect to the extender network.

What is the Web Address for MSRM Setup?

The default IP address of your MSRM extender is 192.168.0.1. You can use this IP to go about the MSRM extender setup.

Final Thoughts

Setting up a new MSRM range extender is pretty simple, provided you perform the configuration very carefully. If you get to see any problem on your device, don’t worry as they are very common. You can follow our troubleshooting guide given in this page.

We hope this MSRM setup guide was helpful to you and that it helped you with the initial setup. If you observe any issues or come across any queries, feel free to share them with us and we will help you.