How to Reset Netfun WiFi Extender?

Generally, Netfun extenders are used to boost the network coverage of your bigger home. These are specially designed to eliminate the dead zones and better the signal strength. Additionally, with so many advanced features and ultra-lightning speed, these show temporary glitches sometimes. So, users need to perform the Netfun WiFi extender reset in those circumstances.

However, reasons may vary for resetting a Netfun extender but you need to understand them. Likewise, it is easy to reset a Netfun WiFi extender and you can perform it by using two ways. It will fix the common errors and give a fresh start to your extender.

So to make you aware of the complete Netfun WiFi extender factory reset, we will share this brief guide with you. Here, we discuss the reasons why you need to reset your range booster and how to perform the factory reset. Stay focused on this post.

Requirements for Resetting Netfun Extender

Why Do We need to Perform the Netfun WiFi Extender Reset?

Additionally, performing the Netfun WiFi extender factory reset is the last option if you cannot tackle the issues with your extender. Here, we disclose the reasons why required to carry out this process:

Frequent disconnections or a weak WiFi signal
Configuration errors
Firmware update issue
Forget the admin login details
Internal glitches

Factory Reset Netfun WiFi Extender

Moreover, you can use two different ways to reset your Netfun WiFi extender reset. You can factory reset it using the Reset button or the web browser, the choice is yours. Additionally, resetting your Netfun WiFi extender will erase all the customized settings and restore the default settings. Here, we begin with the procedures:

1. Reset the Netfun WiFi Extender Using the Reset Button

First and foremost, locate the reset button on the extender.
You can press and hold the reset button for 10-15 seconds using a paperclip or pinpoint.
After that, release the reset button when the LED on the extender starts blinking.
It shows that your router reboots itself.
Now, wait for the extender to complete the reset process.
This may take a few minutes.
Once the reset is complete, the extender will return to its factory default settings.
Hereon, connect the default WiFi network of the extender to the device using the default credentials.
Finally, using the default IP address, you can access the extender’s user interface through a web browser.

2. Reset Through the Web Address

To begin with, ensure that the Netfun extender is turned on
Also, check that the extender network is connected to the smart device.
Next, open your web browser and type the default IP address of the Netfun Extender in the address bar.
The most common default IP address is 192.168.0.1/192.168.10.1.
You will be prompted to enter your login credentials.
Type the default username and password and click on the “Login” button to access the login page.
Look for the “Settings” or “Administration” tab, as the reset option may vary depending on the model.
Hereon, tap on the “Factory Reset” or “Reset to Default” option.
After that, confirm the reset after clicking on the reset option by tapping the “Yes” or “OK” button.
It may take a few moments for the reset to complete, and the device will reboot itself after the reset is complete.
Finally, your extender gets back to its default settings and reconfigures it.

How to Reconfigure the Netfun Wifi Extender After Reset?

In addition, after resetting configuring the Netfun extender is necessary. Without setting it up again, you can’t access the latest features of this range extender. However, reconfiguring it allows you to set it according to your requirements. Here, in this section, we explore the steps to reconfigure the Netfun WiFi extender after reset:

To begin with, connect the device to the router’s network.
Open the web browser and type 192.168.0.1/198.168.10.1 IP address.
Next login to the router’s web interface again, using the default admin details.
Now, visit the smart setup wizard of your range extender.
Here, you are recommended to set a new network name (SSID) and password for your network.
For Advanced settings, follow the instructions given on the screen.
Finally, your router gets reconfigured.

Final Thoughts

On the whole, the Netfun range extender is one of the best networking gadgets that boosts up the network coverage to your bigger home and delivers you an uninterrupted network signal. Additionally, if errors occur and can’t be sorted out by using other methods, then Netfun WiFi extender reset should be the best possible way. You can walk through our brief guide to know the methods and steps to factory reset the Netfun extender. Also, you can check with the next section for reconfiguring your range extender after reset. Still, seeking help? No worries, we are a text away!